Welcome to my journey, or nightmare, we'll see how it goes. If this is your first time here you might want to start at the bottom and read up.

Tuesday, October 19, 2010

I'm putting my foot down!



Oops, I guess my new foot is actually up in this picture. Just picked up this trailer jack base plate the other day. Unfortunately my jack seems to have been designed for a different type of plate or wheel as there was no hole for the pin. I centered it, marked my holes, used a center punch to keep the drill on center, and went at it with my drill and a 7/16" metal drill bit. Once finished the plate and pin fit perfectly. I figured this job would be easier while the trailer was still upside down after painting.

No comments:

Post a Comment